JRC JHS-32B - Page 4

- ii -
１．Usual display ：
ITU
C H
16
MODE: SIMP TEL
OPE : MASTER
SCAN: OFF
SP : ON
OUTPUT: 25W
ALARM : ENABLE
SQL : CLOSE
POWER : AC
01 JAN 2000 23:59 UTC
S: 12゜34゛ W: 123゜45゛ ♪
２．In case of no position / UTC data：( unusual )
ITU
C H
16
MODE: SIMP TEL
OPE : MASTER
SCAN: OFF
SP : ON
OUTPUT: 25W
ALARM : ENABLE
SQL : CLOSE
POWER : AC
CAUTION : NO POSITION / UTC DATA
PRESS ENTER TO INPUT DATA ♪
３．
Press ENTER key. - - INPUT POSITION/UTC DATA - -
POSITION : S12.34 W123.45
UTC : 23:59 (HH:MM)
DATE : 31.12.99 (DD.MM.YY)
SELECT WITH ▼ ▲ , INPUT NO., &
PRESS ENTER ．PRESS CLR TO RETURN．
PRESS STOP TO SET & RETURN．
４．
Press
/
key.
- - INPUT POSITION/UTC DATA - -
POSITION : N : E :
UTC : N : W :
DATE : S : E :
S : W :
SELECT WITH ▼ ▲ ,& PRESS ENTER．
PRESS CLR TO CANCEL．
When connecting with GPS, date, UTC , latitude,
and longitude data from GPS is displayed.
・ The visible alarm blinks for indicating n
o
position / UTC data information. The audibl
e
alarm also sound simultaneously .
･ Check the GPS or check the connection
between GPS and VHF radiotelephone.
･ Or press ENTER key then input correct
position and UTC data manually .
・
「 INPUT POSITION/UTC DATA 」
screen is displayed and it will be in
a
position input state.
・
The window for selecting a coordinate
s
is displayed.
･The combination of latitude / longitude is
chosen by
▼ ▲
key.