JRC JHS-32B - Page 6

- iv -
８．
Input the UTC time when latitude / longitude is
measured.
- - INPUT POSITION/UTC DATA - -
POSITION : S12.34 W123.45
UTC : 12:34 (HH:MM)
DATE : 31.12.99 (DD.MM.YY)
SELECT WITH ▼ ▲ , INPUT NO., &
PRESS ENTER ．
PRESS CLR TO CANCEL．
１０．
Press ENTER key.
- - INPUT POSITION/UTC DATA - -
POSITION : S12.34 W123.45
UTC : 12:34 (HH:MM)
DATE : 31.12.99 (DD.MM.YY)
SELECT WITH ▼ ▲ , INPUT NO., &
PRESS ENTER ．PRESS CLR TO RETURN．
PRESS STOP TO SET & RETURN．
１１．Input the date.
- - INPUT POSITION/UTC DATA - -
POSITION : S12.34 W123.45
UTC : 12:34 (HH:MM)
DATE : 02.01.00 (DD.MM.YY)
SELECT WITH ▼ ▲ , INPUT NO., &
PRESS ENTER ．
PRESS CLR TO CANCEL．
１２．
Press
ENTER
key.
- - INPUT POSITION/UTC DATA - -
POSITION : S12.34 W123.45
UTC : 12:34 (HH:MM)
DATE : 02.01.00 (DD.MM.YY)
SELECT WITH ▼ ▲ , INPUT NO., &
PRESS ENTER ．PRESS CLR TO RETURN．
PRESS STOP TO SET & RETURN．
・ Example of an input of 12：34 UTC ：
Press
1 2 3 4
keys.
Input UTC time, not local time.
・ Press CLR when mis-input., then re-inpu
t
correct value.
・
Time is decided and it will be in the
state of a date input.
・
Example of an input of 2
nd
JAN. 2000 ：
Press
0 2 0 1 0 0 keys.
・ Press CLR when mis-input., then re-inpu
t
correct value.
・ A date is decided.