JRC JHS-32B - Page 76

68
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
Press
ENTER
.
N or S and W or E are set, and the display
prompts for entering coordinates.
Enter latitude and longitude.
Example: Latitude 12° 34’
1
➞
2
➞
3
➞
4
Example: Longitude 123° 45’
1
➞
2
➞
3
➞
4
➞
5
TIP
• It is not necessary to enter the decimal point
(
).
• To correct a mistake made while entering
numbers, just press
CLR
and start again.
Press
ENTER
.
The entered latitude and longitude are confirmed
and DIST-UTC is highlighted.
Enter the time.
Use 24-hour UTC time.
Example: 1:25 PM
1
➞
3
➞
2
➞
5
TIP
• To correct a mistake made while entering
numbers, just press
CLR
and start again.
• Do not input local time.
--DISTRESS CALL EDIT--
CH70 25W
FORMAT :DISTRESS
NATURE OF DIST :UNDESIGNATED DISTRESS
DIST-POSITION :S . W .
DIST-UTC :14:59
TELECOMMAND :G3E SIMP TEL
END OF SEQUENCE:EOS
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS DISTRESS TO SEND.
PRESS CLR TO CANCEL.
--DISTRESS CALL EDIT--
CH70 25W
FORMAT :DISTRESS
NATURE OF DIST :UNDESIGNATED DISTRESS
DIST-POSITION :S12.34 W123.45
DIST-UTC :14:59
TELECOMMAND :G3E SIMP TEL
END OF SEQUENCE:EOS
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS DISTRESS TO SEND.
PRESS CLR TO CANCEL.
--DISTRESS CALL EDIT--
CH70 25W
FORMAT :DISTRESS
NATURE OF DIST :UNDESIGNATED DISTRESS
DIST-POSITION :S12.34 W123.45
DIST-UTC :13:25
TELECOMMAND :G3E SIMP TEL
END OF SEQUENCE:EOS
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS DISTRESS TO SEND.
PRESS CLR TO CANCEL.
--DISTRESS CALL EDIT--
CH70 25W
FORMAT :DISTRESS
NATURE OF DIST :UNDESIGNATED DISTRESS
DIST-POSITION :S12.34 W123.45
DIST-UTC :15:59
TELECOMMAND :G3E SIMP TEL
END OF SEQUENCE:EOS
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS DISTRESS TO SEND.
PRESS STOP TO RETURN.