JRC JHS-32B - Page 87

1
2
3
4
5
6
7
8
9
10
79
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
Select an item using
/
and press
ENTER
.
The window closes and TELECOMMAND1 is
highlighted.
Press
/
.
• The TELECOMMAND1 window opens.
• The window contains the following four items:
DISTRESS RELAY
DISTRESS ACK
G3E SIMP TEL
G3E DUP TEL
However, when an item other than DISTRESS is
selected in step 5, only G3E SIMP TEL and G3E
DUP TEL appear in the window.
TIP
Press
/
, or
CLR
to go back to step 5.
Select an item using
/
and press
ENTER
.
The window closes and WORK CH is highlighted.
TIP
TELECOMMAND2 is fixed as NO INFORMA-
TION and cannot be edited.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT :ALL SHIPS
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:EOS
CALL CH :70
SELECT WITH , & PRESS ENTER .
PRESS CALL TO SEND.
PRESS STOP TO RETURN.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT
CATEGORY DISTRESS RELAY
TELECOMMAND1 DISTRESS ACK
TELECOMMAND2 G3E SIMP TEL
WORK CH G3E DUP TEL
END OF SEQUENCE
CALL CH
SELECT WITH , & PRESS ENTER .
PRESS CLR TO CANCEL.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT :ALL SHIPS
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:EOS
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS CALL TO SEND.
PRESS STOP TO RETURN.
MORE