Chapter 7 INITIAL SETTINGS
93
7.9.2.11 RAIM ACCURACY LEVEL
Set the RAIM accuracy level to be used. RAIM is the function that the receiver judges whether the accuracy
of GPS position information meets the conditions or not. The higher the accuracy level is, the wider the
judgment range is. When off is selected, RAIM accuracy level function is stopped and the judgment cannot be
performed. For single GPS, set to 30m or more.
7.9.2.12 EXCLUSION SATELLITE
It uses the GPS satellites to get position information. But in this setting it sets for a satellite to disable.
Please set when the failed GPS satellite was found.
To Next Page
Loading...
