144
Chapter 12 SPECIFICATIONS
12.6.3 AIS FUNCTION (STANDARD BUILT IN)
1) Display
Number of targets Up to 50 targets (stores up to 1,000 ship static data)
Target information Displays MMSI, call sign, ship name, COG, SOG,
CPA, TCPA, direction, distance.
Filters Distance only (initial setting value 20NM)
Select target Available
Select a Dangerous ship targets No CPA/TCPA decision
2) Operation Built-in
3) Installation NMEA1~3 available
12.6.4 TT FUNCTION (STANDARD BUILT IN)
1) Acquisition MANUAL，AUTO (by guard zone)
2) Tracking 10 targets (Automatic tracking)
3) Display
Tracking data 1 ship (AIS or TT)
Maximum tracking range 20NM (This varies depending on the range)
Target information Displays items are true bearing, distance, true course,
and true speed.
Display of Vectors True/Relative
4) Operation Built-in
12.7 INPUT/ OUTPUT SIGNAL
12.7.1 INPUT ENABLE SIGNAL
(1) Navigation equipment IEC61162-1/2(※1)
L/L: GGA>RMC>RMA>GNS>GLL
SOG/COG: RMC>RMA>VTG
Log speed: VBW>VHW
HEADING: THS>HDT>HDG>HDM
DEPTH: DPT>DBT
WATER TEMP: MTW
ROT: ROT (Unsupported on display)
RUDDER: RSA (Unsupported on display)
AIS: VDM, VDO, ALR
WIND: MWV>VWT, VWR
WAYPOINT: RMB>BWC>BWR
(2) Bearing signal JRC-NSK format (JLR-10/20/30)(by NMEA3 port)
IEC61162-1/2(※1) 4800bps/38400bps: THS>HDT>HDG>HDM
(3) Speed signal IEC61162 4800bps: VBW, VHW
※1:IEC61162-2 Conformity is unnecessary.
(Insulation is unnecessary. Input electrical tests are unnecessary.)
To Next Page
Loading...
