APPENDIX
A-8
MENU FUNCTION LIST
Main Menu
Item Setting Contents
1. RADAR Echo
1. Pulse Length SP / MP / LP
2. IR OFF / Low / Middle / High
3. Target Enhance OFF / Level1 / Level2 / Level3
4. Process
OFF / 3Scan COREL / 4Scan COREL /
5Scan COREL / Remain / Peak Hold
5. Video Latitude Narrow / Normal / Wide1 / Wide2
6. Video Noise Rejection OFF / Level1 / Level2 / Level3
7. Timed TX OFF / ON
2. Tuning
3. Motion Mode
1. Motion RM / TM
2. Bearing Mode HUP / NUP / CUP
4. Radar Trails
1. Trails REF Level Level1 / Level2 / Level3 / Level4
2. Time/All Combine OFF / ON
3. Trails Mode True / Relative
4. Trails Interval
Short :
OFF/15sec/30sec/1min/2min/3min/
4min/5min/6min/10min/15min/CONT
Middle :
OFF/30sec/1min/2min/3min/4min/
5min/6min/10min/15min/30min/CONT
Long :
OFF/1min/2min/3min/4min/5min/
6min/10min/15min/30min/1hour/CONT
Super Long :
OFF/30min/1hour/2hour/3hour/4hour/
5hour/6hour/10hour/12hour/24hour/CONT
5. Vector Length
1. Vector Mode True / Relative
2. Vector Length 1 - 60min
6. Marker
1. Maker Mode True / Relative
2. VRM Unit NM / km / sm
3. Range Rings(RR) OFF / ON
7. Target
1. Function ON/OFF
1. TT OFF / ON
2. AIS OFF / ON
2. CPA Limit 0.1 - 9.9NM
3. TCPA Limit 1 - 99min
4. CPA Ring Display OFF / ON
5. Target Number Display
1. TT OFF / ON
2. AIS OFF / ON
6. ALR Alarm From AIS OFF / ON
7. AIS Display Targets 20 / 30 / 40 / 50
8. AIS List Display OFF / ON
8. NMEA Info. Set
To Next Page
Loading...
