JRC JMA-1030 Series - Output Possible Signal; Standard Configuration; Option Cable

Chapter 12 SPECIFICATIONS
145
12.7.2 OUTPUT POSSIBLE SIGNAL
(1) Navigation equipment
Radar date: RSD
Own ship’s data: OSD
TT data: TTM, TTL, TTD
Latitude/ Longitude data: GGA, RMC, GNS, GLL,
COG/SOG: RMC, VTG (Received GPS data)
Bearing signal: THS, HDT (Received GPS Compass data)
(2) External Buzzer Open collector contacts one port. (NMEA cable option necessary)
(3) Output RGB signal To incorporate optional kit (NQA-2447) is necessary
※In this case, water and dust proofing (IP55) of rear side of display unit is not guaranteed
(4) Slave display output no function
(5) LAN no function
12.7.3 STANDARD CONFIGURATION
Scanner: 1unit
Display Unit: 1unit
Sun cover: 1unit
Installation cable: 1pc. (10m)
Power cable: 1pc. (2m)
Appended parts: 2pcs. (fuse)
Instruction manual: 1 book (Including Installation manual and Quick manual)
12.7.4 OPTION CABLE
Installation cable:
Cable length Cable type
5m CFQ9924-5
15m CFQ9924-15
20m CFQ9924-20
30m CFQ9924-30
NMEA cable (waterproof (IPX5)):
Cable length Cable type
1m H-7ZCRD1689