123
Chapter 9 MAINTENANCE AND CHECK
9.3.4 SCANNER INFORMATION
Displays the following scanner information.
Scanner Transmit Power
Motor Type
Magnetron Current
(The maximum value of a numeric display of the magnetron current is 127)
9.3.5 HARDWARE INFORMATION
Displays the following hardware information.
Serial Number
9.3.6 ERROR LOG
The error log displays previously occurred system alarms with the dates and times when they occurred.
9.3.7 LINE MONITOR
Serial communication data can be seen on the built-in Line monitor.
Line monitor can be used to make sure that the serial data are received properly.
9.3.8 SELF TEST
The following tests can be performed.
Key Test
Buzzer Test
Key Light Test
Monitor Display Test
Memory Test
Line Test
Sensor Test
To Next Page
Loading...
