EasyManua.ls Logo

JRC JMA-1030 Series - Before Operation; Pictorial Indications and Safety Symbols

JRC JMA-1030 Series
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xi
BEFORE OPERATION
BEFORE OPERATION
PICTORIAL INDICATION
Various pictorial indications are included in this manual and are shown on these equipment so
that you can operate them safety and correctly and prevent any danger to you and/or to other
persons and any damage to your property during operation. Such indications and their
meanings are as follows.
Understand them before you read this manual.
DANGER
This indication is shown where incorrect equipment
operation due to negligence may cause death or
serious injuries.
WARNING
This indication is shown where any person is supposed
to be in danger of being killed or seriously injured if this
indication is neglected and these equipment are not
operated correctly.
CAUTION
This indication is shown where any person is supposed
to be injured or any property damage is supposed to
occur if this indication is neglected and these
equipment are not operated correctly.
EXAMPLES OF PICTORIAL INDICATION
Electric Shock
The U mark represents CAUTION (including DANGER and
WARNING).
Detailed contents of CAUTION ("Electric Shock" in the
example on the left) is shown in the mark.
Disassembling
Prohibited
Prohibited
The ; mark represents prohibition.
Detailed contents of the prohibited action ("Disassembling
Prohibited" in the example on the left) is shown in the mark.
Disconnect
the power plug
Instruction
The z mark represents instruction.
Detailed contents of the instruction ("Disconnect the power
plug" in the example on the left) is shown in the mark.

Table of Contents

Related product manuals