EasyManua.ls Logo

JRC JMA-1030 Series - Chapter 2 START THE BASIC OPERATION; 2.1 Panel and Screen Display Layout

JRC JMA-1030 Series
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 START THE BASIC OPERATION
28
Chapter 2 START THE BASIC OPERATION
If the basic adjustment is made by the serviceman beforehand, please run it as it is.
(In the case of no adjustment is done by the serviceman beforehand, you had better grasped the operation of
this radar through referring to Chapter 5, then please perform the initial settings that are listed in Chapter 7.)
The high definition 7-inch wide display has a touch panel and can be operated by tracing a screen by means
of a finger or touch pen. If you want to know what we mean when we mention tap, flick and swipe when you’re
using a touch screen, take a look at this table.
The operation with touch panel:
TAP: Push an item once.
Swipe:
Sliding the finger while it is touching the screen.
Flick:
Flick is just like a swipe, only faster.
Long tap: Pushing a item and keeping more than 3 seconds.
The operation of a Rotary knob:
Click: Push in a Rotary knob once.
Rotating and choosing the state of a screen, then click and fix.
By using a touch sensor, it is possible to use the all functions of the radar.
On the other hand, by using the rotary knob, it is possible to control the radar in the same way as the touch
sensor.
By using a combination of rotary knob and touch sensor, further comfortable radar operation is possible.

Table of Contents

Related product manuals