142
Chapter 12 SPECIFICATIONS
12.6 DISPLAY
12.6.1 INTEGRATED DISPLAY UNIT (NCD-2256)
1) Structure Desk Top Integrated Type
(LCD Monitor Unit/Keyboard Unit/Processor Unit Integrated Structure)
Vertical installation only desk top integrated type
Option: Overhead Mounted kit installation
2) Dimensions Height 235.2mm × Width 162mm × Depth 77.3mm
(The U style mount base and the both sides knob bolts are
included.)
3) Mass Approx. 1.7kg(Without Sun cover)
4) Tune Method Manual / Auto
(Bar-graph indication is displayed at the time of adjustment.)
5) STC (SEA) Manual / Auto
6) FTC (RAIN) Manual / Auto
7) Radar Interference Rejection Built-in (The effect can be adjusted by three stages.)
8) Bearing Marker 360° in 5° digit
9) Heading Line Electronic
10) Off Center move to the defined coordinates of 4 patterns
(4 patterns are back side 64dots,left side 92dots, front side
92dots, right side 92dots from the default center position)
Transition of the radar trails is possible during Off Center mode.
11) True Motion Unit Built-in (Not available at the maximum range)
12) True Motion Reset Position 40% of radius of any range
13) Radar trail indication True motion mode: Only true motion trails
Relative motion mode: True or relative motion trails
Trail time length: 15 sec to 15 min/Continuous
30 sec to 30 min/Continuous
1 min to 1 hr/Continuous
30 min to 24 hr/Continuous
Arbitrary trail time length can be displayed at any time.
Possible to display time series trail and continuous trail
by color classification.
* When switching to true/relative trails, the radar trails
are cleared. Transition of the trails is possible during Off
Center mode (Relative motion). (Scroll)
When the bearing mode is switched (RM (T), TM), the
radar trails are taken over at between RM (T) and TM.
14) Variety of Pulse width SP1/ SP2/ SP3/ MP1/ MP2/ LP1/ LP2
(LP2 is JMA-1034 only)
15) Target enhance 3 stages
To Next Page
Loading...
