Chapter 1 INSTALLATION
1
Chapter 1 INSTALLATION
1.1 OVERVIEW
The proper installation of the radar equipment is critical in ensuing its effective and reliable performance as
well as facilitating maintenance and repair. Carefully install the radar equipment by following the procedures
below.
Considering the weight of the scanner unit and install it in a high place as possible.
It is preferable to install the display unit in the wheel house to facilitate observations.
Available cable lengths and types for installing the radar JMA-1030 are as shown in the table
below. Request an appropriate cable from JRC beforehand.
A cable longer than the sufficient length may degrade radar performance, so give it careful
consideration when planning the installation.
10m cable is the standard configuration.
CFQ9924-5 5m (8 core) *Option
CFQ9924-15 15m (8 core) *Option
CFQ9924-20 20m (8 core) *Option
CFQ9924-30 30m (8 core) *Option
Installation Cable
Type Name: CFQ9924-10
Length: 10m (8core)
Standard Supply
EXTERNAL SIGNAL INPUT
POWER INPUT 10.8V to 31.2V
Installation cable
Length
10m
Power Supply Cable
Type Name: CFQ-9900
Length: 2m
Standard Supply
To Next Page
Loading...
