JRC JMA-1030 Series - Page 190

APPENDIX
A-11
Item Setting Contents
5. Master Reset
6. Send Data
3. Beacon Setting
1. Station Select AUTO / Manual
2. Frequency 283.5 - 325.0kHz
3. Baud Rate 50bps / 100 bps / 200bps
4. Send Data
4. SBAS Setting
1. Satellite Search AUTO / Manual
2. Ranging OFF / ON
3. SBAS Satellite Number 120 - 138
4. Send Data
9. Control
1. Touch Panel Calibration
2. Buzzer
1. Key ACK OFF / 1 - 5
2. Operation Error OFF / 1 - 5
3. CPA/TCPA OFF / 1 - 5
4. AZ/Alarm Zone OFF / 1 - 5
5. Target Lost OFF / 1 - 5
6. System Alarm OFF / 1 - 5
10. Maintenance
1. Partial Reset
1. All Menu
2. RADAR Echo
3. Initial Setting Menu
4. Main Menu
2. All Reset
3. System Time Clear
4. Scanner Time Clear
1. TX Time Clear
2. Motor Time Clear
3. ANT to DISP Unit
4. DISP to ANT Unit
5. Table Update
1. Initial Value
1. All Menu
2. RADAR Echo
3. Initial Setting Menu
4. Main Menu
2. Insert Language
3. STC Curve
6. Internal Setting
1. Internal Memory to USB
1. All Menu
2. RADAR Echo
3. Initial Setting Menu
4. Main Menu
5. Mark Setting
2. USB to Internal Memory
1.All Menu
2. RADAR Echo
3. Initial Setting Menu
4. Main Menu
5. Mark Setting
7. USB Format
11. System Setting
1. Master/Slave/DEMO Master / Slave / Demo
2. Own Ship Outline
1. All Length 0.0 - 600.0m
2. All Width 0.0 - 200.0m
3. Scanner (from Bow) 0.0 - 600.0m