2-6
2
• Eliminating the interference on frequencies used for marine communications and navigation
due to operation of the radar. All cables of the radar are to be run away from the cables of
radio equipment. (ex. Radiotelephone. Communications receiver and direction finder,
etc.) Especially inter-wiring cables between scanner unit and display unit of the radar should
not be run parallel with the cables of radio equipment.
• Cable should not be exposed sharp bends.
• The grounding of equipment units should be carried out according to INSTALLATION OF
SCANNER UNIT.
5) After installation
After you have completed the installation work, make a installation report with your
signature and explain it to the customer, then request him to keep the report on board a ship.
The installation report is now available for download on the our Marine Service Department
website (https://www2.msd.jp).