JUKI DDL-8000A User Manual

A
A
A
A
B
B
B
B
B
B
B
B
A
A
A
A
D
D
D
D
Case 1 : Longer A and shorter B
Adjustment : [P32] Decrease the set value.
A becomes shorter and B becomes longer.
Case 2 : Shorter A and normal B
Adjustment : [P32] Increase the set value.
A becomes longer and B becomes shorter.
Case 3 : Normal A and longer B
Adjustment : [P33] Decrease the set value.
B becomes shorter.
Case 4 : Normal A and shorter B
Adjustment : [P33] Increase the set value.
B becomes longer.
Start point
Start point
Start point
Start point
– 46 –
⑥
How to balance stitches for [Bar Tacking] (Function setting Nos. P32 and P33)
Example) Step 1: Setting stitch number for Bar-Tacking A = B = 4 and turns of Bar-Tacking D = 4
Step 2: Sewing the pattern in normal speed.
Step 3: If unbalanced situation is appeared please correct it as below:

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic