1) Punch dots on the positions of the setscrews of
solenoid valve (asm.) and regulator (asm.) on the
bottom surface of the machine table.
Besides, awling is performed on JUKI genuine
table.
2) Fix solenoid valve (asm.)
1
with wood screw
2
supplied with the sewing machine as accesso-
ries.
3) Fix regulator (total asm.)
3
with wood screw
4
supplied with the sewing machine as accesso-
ries.
4) Connect ø6 and ø8 hoses attached to regulator
(total asm.)
3
to the respective solenoid valves.
5) Insert dust bag
5
into the top end of hose
9
for
dust bag and x it with band
6
supplied with the
sewing machine as accessories.
4-12. Installing the bird’s nest prevention (CB) type sewing machine
1
2
4
3
6
5
9
5
9
4-11. Installing the thread stand
1) Assemble the thread stand unit, and insert it in
the hole in the machine table.
2) Tighten locknut
1
to x the thread stand.
3) For ceiling wiring, pass the power cord through
spool rest rod
2
.
(bottom surface of the machine table)
75
291
34
233
106107
(mm)
1
2
To Next Page
Loading...
