– 23 –
■
Sewing shape list second screen
Press .
Press .
t
Press .
Press .
6-3. Basic screen
The screen after turning ON the power source becomes the screen at the time of turning OFF the power
source for the last time.
Every time
switch is pressed, the screen changes as follows :
Example) Free stitching of
2-step zigzag with reverse feed stitching (Contents of display change depending
on the set values.)
■
Sewing shape list rst screen
Selection of each shape is
performed.
■
Sewing shape setting screen
Setting of zigzag width, position of stitch base line, etc. is performed.
■
Reverse feed stitching setting screen
Setting of kind of condensation, number of stitches, etc. is performed.
When is pressed for approximately three seconds in a screen other than the sewing shape
list screen, the screen directly transits to the sewing shape list screen.
s
Press .
* Free stitching means the
general sewing.
To Next Page
Loading...
