– 65 –
1) Press
1
in the copy and deletion of cycle stitching pop-up screen.
2) Copy pop-up screen is displayed.
3
: Select the cycle stitching pattern of the copy source with “+” and “–”. (It is possible to select only No.
which has been registered.)
4
: Select the cycle stitching pattern of the copy destination with “+” and “–”. (It is possible to select only
No. which has been not registered.)
When
is pressed here, the screen returns to the former one without performing copy.
3) When
is pressed, copy is performed. The No. which is selected to the copy destination is in the se-
lective state after copy has been performed.
(3) Copy and deletion of the cycle stitching
Press in the cycle stitching setting screen to display the copy and deletion of cycle stitching pop-up
screen. Then copy and deletion of the cycle stitching pattern can be performed.
■
Copy pop-up screen
○
How to copy
■
Copy and deletion of cycle stitching pop-up screen
q w
e r
e
r
To Next Page
Loading...
