JUKI IT-100D - Pattern Stitching; SettNg the Pattern StTchNg

– 56 –
The respective shapes of straight stitch, 2-step zigzag, 3-step zigzag, 4-step zigzag, scallop, blind stitch, and
custom can be registered in the pattern.
Patterns, the zigzag width of which is different from each other, and those, the positions of the stitch base
line of which are different from each other can be changed over and used without re-setting the data even in
case of the same zigzag shape by registering as patterns.
It is possible to register as many as 99 patterns.
(1) Setting the pattern stitching
Example) Scallop stitching
■
The second screen of the sewing shape list
6-11. Pattern stitching
■
Pattern selection pop-up screen
1) Select
1
in the
second screen of the
sewing shape list.
2) Press switch
2
corre-
sponding to the sew-
ing which has been
registered, or the pat-
tern you desire to edit
in the pattern selec-
tion pop-up screen.
3) Press to display
the sewing shape set-
ting screen.
When the power source is turned OFF without pressing key, the inputted data returns
to the former one. When you desire to determine the data, be sure to press key.
Feed direction of all of the condensation custom patterns is in the reverse feed direction.
Standard delivery level of the key lock is “1”. When the level of the key lock is the case other
than “0”, be sure to change the level to “0” to perform the operation below.
q
w