– 49 –
4)
Set the number of stitches of each step in the programmed stitching edit screen.
3
: Set the step with “+” and “–”. As many as 20 steps can be set.
4
: Set the number of stitches with “+” and “–”. As many as 500 stitches can be set.
5) When setting of all steps has been completed, select automatic thread trimming
6
at the last step, or set “0”
stitch to the next step.
When the last step is “20”, it is not necessary to set “0” stitch at the next step.
6) When setting is completed, press key to determine the contents of setting.
■
Programmed stitching selection screen
Example) 2-step zigzag
■
Sewing shape setting screen
■
Programmed stitching edit screen
Press
▲
, in case of more than 10 steps, and programmed stitching
selection screen of “11” to “20” is displayed.
Press
▲
and the screen returns to programmed stitching selection screen
of “01” to “10”.
1) Select
showing pro-
grammed stitching with
1
of sewing shape setting
screen.
When automatic thread trimming is selected, “0” is not displayed in the last step.
When increasing the number of steps, proceed to the next step after releasing
automatic thread trimming.
2) Press
to display the
programmed stitching set
-
ting screen.
3) Number of stitches of
each step is displayed in
the programmed stitching
setting screen.
Press switch
2
corre-
sponding to each step
and the screen moves to
the programmed stitching
edit screen.
When the power source is turned OFF without pressing key, the inputted data returns
to the former one. When you desire to determine the data, be sure to press key.
w
w
q
e r
e r
t
y
q
To Next Page
Loading...
