JUKI RS-1 - Replacing the Lens Filter

Maintenance Guide
4-4
4-4 Replacing the Lens Filter
1) Remove the light unit. See section 4-1 [Replacing the OCC Unit].
2) Remove the filter plate.
3) Remove the filter from the filter plate.
4) Reassemble the components in the reverse order of disassembly.
5) After replacement, refer to 4-7 [Readjustment Items After Replacing OCC Unit].
Perform necessary adjustments and enter MS parameters.
Washer assembled hexagon
socket head cap bolt M3 L=6
Filter plate
Filter
Truss screw M2 L=2