Industrial Sewing Machine SADE
12
RULES before using/maintaining the machine. The content of the SAFETY RULES in-
clude items which are not contained in the specifications of your product.
The constructional solutions for safety aspects adopted in this machine minimize mal-
function of sewing machine provided that the machine will be properly connected to the
power supply (see section 4.3) and that the safety rules of working and are respected.
The most important elements used in the machine, serving to increase the level of safe-
ty during use are:
o safety devices monitoring whole sewing process,
o solutions which allow controlling the machine by buttons located on the control box
and program operated by touch screen,
o ability to give authorization (card reader and barcode reader),
o the protection against the machine self-starting as a result of the return of power
supply after the break,
o engine overload protection.
NOTE!
In the exceptional case and while failure of the machine immediate-
ly
turn off the machine. Begin to repair the damage after securing
the machine against switching on (remove the plug from the mains
or by switching the main switch at the control box to "0" and secur-
ing it against restarting).
IT IS FORBIDDEN
to taking by the User any actions that
could lead to a lowering of machine safety (eg. w
damaged lasers, damaged cables etc.).
Before using the machine read these instructions and other explanatory documents
supplied with accessories of the machine and follow the rules mentioned below, re-
garding the elimination of hazards and taking appropriate precautions.
1. Use the sewing machine only in the intended manner (see section 3.1).
2. Never use the machine for any application other than its intended one and in any
manner other than that prescribed in the instruction manual in order to prevent ac-
cident that can result in personal injury or death. JUKI assumes no responsibility
for damages or personal injury or death resulting from the use of the machine for
any application other than the intended one.
3. Carefully keep the instruction manual and the explanatory documents at
hand for quick reference.
4. The machine is designed for indoor operation.
5. The machine is not intended for use in explosive atmospheres.
To Next Page
Loading...
Need help?
General
