Industrial Sewing Machine SADE
89
Fig. 59. Label Pre seam and machine stop point
7.1.2.15 Label Post seam and setting stop point of the machine
This is actually the most important setting of the system. The end label or traceability
label is essential part of the documentation of the SADE system. It is unique label that
you can define under section label in the settings section. However you can select the
stop point of the machine meaning when it should receive the command to interrupt the
sewing process, print the label and ask for scanning the label. After you selected the la-
bel and its scanning time you can move the label in the seam by clicking at it and mov-
ing it side wise.
Fig. 60. Main menu
To Next Page
Loading...
