JUKI SADE - Machine Identification (in Settings); Needle Change Setting

Industrial Sewing Machine SADE
73
Fig. 35. The configuration screen
7.1.2.1 Machine identification (in settings)
Machine identification is probably the most important code for the product traceability
system. The code is alpha-numeric and 60 positions in length.
WARNING!
Always make sure the correct machine code is set.
Fig. 36. Machine identification (in settings)
7.1.2.2 Needle change setting
The “Needle change” - parameter offers an option to set a stitch counter. Once the
counter has reached the defined amount of stitches.