Industrial Sewing Machine SADE
78
Enable declare ok, after the checking of the tear seam sewing and some tension values
being outside the limits normally the parts would be rejected and automatically declared
as fault part. The Enable declare OK function allows a super user / administrator to de-
clare the part as OK. However the declaration is documented in the database with time
date and name of user who declared okay.
Fig. 43. The declare tab
NOTE!
Enable declare ok is a powerful tool that you might want to disable
in general or just grant it to very responsible persons.
7.1.2.8 Product options
On the [Sewing and products] tab production cycle (select sewing job to be used) and
material options can be set.
To Next Page
Loading...
