Industrial Sewing Machine SADE
39
Static barcode scanners
Static barcode scanners provide a way to monitor data
prior of, and during the production cycle. Figure 17 shows
the scanners mounted under the thread cone stand to
check data found on the inside of the top thread cone. It
scans both, the top and bottom th
thread cones are checked for presence due to sensors.
Fig. 17. Static barcode scanners
Monitoring scanners
Special scanner is mounted at the sewing head
(figure 18
). Purpose of this scanner is to check for
proper application of the traceability barcode label
to the piece, the so called scan-back.
Fig. 18. Monitoring scanners
Scanners of proper thread conducting are placed at several places on the machine.
By default up to 16 scanners can be configured. For example containers for correct and
rejected products can be scanned as well as additional material (batches) that are re-
quired during the production process.
Fig. 19. Scanners on the stand for thread spools
To Next Page
Loading...
