– 18 –
* The content of setting of the setting No. returns to the initial value by pressing switch and switch
simultaneously.
3. After completion of the changing procedure, press switch or switch to confirm the updated value.
(Caution) If the power is turned OFF before carrying out this procedure, the changed content is not updated.
When switch is pressed, the display on the panel changes to the previous setting No.
When switch is pressed, the display on the panel changes to the subsequent setting No.
After completion of the operation, the machine is returned to the normal sewing state by turning
OFF the power and re-turning it ON.
(5) Setting procedure of the machine head
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation panel
to be used for the setting procedure of the machine head.
1. Refer to “III-(6) Setting of functions of SC-922
Instruction Manual”, and call the function setting
No. 95.
2. The type of machine head can be selected by
pressing switch ( switch ).
* Refer to “CAUTIONS WHEN SETTING UP THE
SEWING MACHINE” or “Machine head list” on the
separate sheet for the types of machine heads.
3. After selecting the type of machine head, by
pressing switch ( switch ), the step
proceeds to 96 or 94, and the display automatically
changes to the contents of the setting corresponding
with the type of machine head.
To Next Page
Loading...
Need help?
General
