JUKI SC-922 Engineer's Manual

– 64 –
Example) When function setting No. 1 soft start function is added to the item of out-touch setting:
1. Select function No. 12 for operation methods of function settings 1 to 3.
2. Use the key to select the item of “_nUM”.
3. Use the key to select “SET_”.
4. Use the key to select the No. 1 soft start function.
5. Use the key to determine the setting above.
6. Use the key to end the setting of one-touch operations.
7. Use the key or to select the item of “_End”.
8. Use the key or to return to function setting.
12. SETTING OF ONE-TOUCH OPERATIONS
(1) One-touch operations
For SC-922, given functions can be added to settable items by means of the method described in “5.-(3) One-
touch setting”.
1. Displayed contents and setting method
Activate the setting mode with reference to “5.-(4) Function setting” and select function No. 161.
When function No. 161 is selected, the following are displayed.
A
B
Use the key or to select “_End” or “_nUM” item.
When “nUM” is selected, use the key or to select a setting number
from SET1 to SET8 after “SET1” appears on the indicator A .
Use the key or to enter the item number to be set.
(Refer to “12.-(2) One-touch settable item list” for settable parameters.)
Alternately lights
1
1
6
E
S
T
E
T
S
d
n
E
M
U
n
1
E
T
S
E
T
8
S
∗
∗
∗
∗
∗
∗
∗
∗
1
1
6
E
S
T
n
E
T
S
M
U
n
E
T
S
P
o
1
E
T
S
1
T
F
o
S
2
n
o
P
E
T
S
E
T
n
u
M
S
E
T
S
d
n
E
1
1
6
E
S
T

JUKI SC-922 Specifications

General

Brand	JUKI
Model	SC-922
Category	Sewing Machine
Language	English