JUKI SC-922 Engineer's Manual

– 54 –
11. HOW TO USE SIMPLIFIED PROGRAM FUNCTION
(1) Simplified program function
SC-922 is equipped with the function that can create simplified programs to receive external signals, transit
signals externally, and control the machine head without using dedicated input device.
1. Specifications
1) 4 programmed operations performable at the same time
2) 25-step capacity available per 1 program
3) Interoperable among 4 programs
2. Displayed contents and function
1) Displayed contents at simplified program selected
Displayed contents
Displayed contents
Function
Remarks
Function
Remarks
Pro_
Pro_
The program selection mode is indicated.
_End
The program entry function ends.
Pro1 Program 1 is selected.
Program 2 is selected.
Program 3 is selected.
Program 4 is selected.
Pro2
Pro3
Pro4
142
Setting function number
2) Displayed contents at program selected
Function
Remarks
Function
Remarks
Function
Remarks
_oFF
The programmed operation stops.
The programmed operation is activated.
The program contents can be viewed.
The program input mode is started.
Operation mode selection
Program step number
In the process of program 1 entry
In the process of program 2 entry
In the process of program 3 entry
In the process of program 4 entry
Refer to the table above.
Selectable only when the right LED
display shows 00
Selectable only when the right LED
display shows 00
Selectable only when the right LED
display shows 00
Selectable only when the right LED
display shows 00
_ _on
CHE_
Pro_
0
01 to 25
1
2
3
4
Displayed contents
Displayed contents
Displayed contents

JUKI SC-922 Specifications

General

Brand	JUKI
Model	SC-922
Category	Sewing Machine
Language	English