JUKI TR6SNR - Replacement of X-Axis Motor

Maintenance Guide
5-3
5-3. Replacement of X-axis motor
Detach the XF cover and the X cover and replace the motor.
Remove the motor together with the bracket using the A screw, and then separate the motor
using the motor mounting screw B.
Remove the pulley (C) from the motor and replace the motor with a new one.
Make assembly so that dimension of motor and pulley will be 3.4 mm.
When the replacement is finished, adjust the belt tension.
 X motor ASM (part No.: 40045057)
4.6mm