Art. No. SC 1000 KNX
Figure 2: Device components at the back (with attached KNX communication module)
(8) KNX communication module
(9) Connection terminals for power supply DC 24 V (- / +)
nb: Reserved for future use
(10) Connection for KNX bus cable
(11) Connector socket for push-button extension module
(12) Guide to the connection for future extension
(13) Connector socket (reserved for future use)
(14) Module slot (reserved for future use)
Page 10 of 347
Installation, electrical connection and operation
To Next Page
Loading...
