Art. No. SC 1000 KNX
4.2.2 Notes on software
ETS configuration and commissioning
For configuration and commissioning of the device, ETS3.0 Version f or ETS4.0.6 or higher is
required. Advantages with regard to downloading (significantly shorter loading times) and
parameter programming using the integrated database plug-in can be expected only if this ETS
versions are used.
The necessary product database is offered in the *.VD5 format. No product database is
available for ETS2 and older versions of ETS3.
Page 24 of 347
Software "Smart Control 501511"
Notes on software
To Next Page
Loading...
