Art. No. SC 1000 KNX
4.2.4.2.3 Switching function
For each rocker or each button with the function set to "Switching", the ETS indicates a
1-bit communication object. The parameters of the rocker or button permit fixing the value this
object is to adopt on pressing and / or on releasing (ON, OFF, TOGGLE – toggling of the object
value). No distinction is made between a brief or long press.
The status LEDs can be configured independently (see page 161-162).
Page 146 of 347
Software "Smart Control 501511"
Functional description
To Next Page
Loading...
