Art. No. SC 1000 KNX
4.2.4.1.20 Cleaning function
The device features a special cleaning function in order to avoid activating unintentional
functions when removing dirt, finger prints etc. While the cleaning function is active, touching
the user interface will cause no action.
The cleaning function can be recalled via the function page. The menu can be recalled by
touching the tile with theŽ. The display then switches to the display page of the cleaning
function. An animated graphic is displayed for 30 seconds. All other indicators and controls are
hidden. The device displays the remaining cleaning time on the screen. At the end of the
cleaning time, the device returns to normal operation.
Figure 68: Recalling the cleaning function
i Clean the user interface with a soft cloth. If needed, moisten the cleaning cloth. Do not use
sharp objects for cleaning. Do not use sharp cleaning agents, acids or organic solvents.
Keep moisture from penetrating into the device.
i The master button W, which is located outside of the display, is independent of the
cleaning function. Consequently, the master button can also be operated with an active
cleaning function.
Page 138 of 347
Software "Smart Control 501511"
Functional description
To Next Page
Loading...
