Jung Smart Control SC 1000 KNX - Page 117

Art. No. SC 1000 KNX
Objects
A channel of the "ASCII Text" function has 2 KNX communication objects...
- "D.Input Channel x - ASCII text 1" (14 Bytes, receiving):
This object allows the device to receive ASCII texts of up to 14 characters, which are
transmitted via the KNX bus. This influences the display area of the channel element.
Consequently, the feedback object must always be configured properly so that the displays
of the channel element work correctly.
The ASCII test must be transmitted "actively" to the bus.
- "D.Input Channel x - ASCII text 2" (14 Bytes, receiving):
This object allows the device to receive ASCII texts of up to 14 characters, which are
transmitted via the KNX bus. This influences the display area of the channel element.
Consequently, the feedback object must always be configured properly so that the displays
of the channel element work correctly.
The ASCII test must be transmitted "actively" to the bus.
Page 117 of 347
Software "Smart Control 501511"
Functional description