Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
be used for switching (ON, OFF, TOGGLE – toggling of the object value) or for scene recall
without or with storage function. In the last case, a press on the full surface causes a scene to
be recalled in less than a second. If the extension module is to send the telegram for storing a
scene, full-surface actuation must be maintained for more than five seconds. If full-surface
actuation ends between the first and the fifth second, the extension module will not send any
telegrams. If the status LEDs of the rocker are used as "button-press displays", they will light up
for three seconds during transmission of the storage telegram.
i Full-surface actuation cannot be configured in the push button functions.
Page 152 of 347
Software "Smart Control 501511"
Functional description

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English