Jung Smart Control SC 1000 KNX - Page 271

Art. No. SC 1000 KNX
corresponds to 0.5K. The status value
"0" means that no setpoint shift is active.
The following parameters are only visible for the function "Fan controller, internal"...
Displaying status value Yes
No
A status value can be displayed
optionally below the text name. The
status value displays the level of the fan
controller returned by the internal room
temperature controller in textual form
(Off, Level 1, Level 2, ..., Level 8). The
status value "Off" means that no fan
control is active.
The "ASCII Text" function does not contain any special parameters.
h Display -> Weather station
Displaying wind speed in km/h
in Bft
in m/s
No indication
The device offers the possibility to
display measurement data of a KNX
weather station. Each measured value
on the display page of the weather
station has its own display element. The
measured value itself is received by a
separate KNX communication object.
This parameter defines whether the
measured value "wind speed" should be
evaluated and displayed. Furthermore,
the parameter also defines the unit of
the measured value.
The measured value of the wind speed
must be made available to the device
via the bus in "m/s" in compliance with
KNX DPT 9.005. According to the
parameter setting of the measured
value, a conversion and display in the
formats "m/s", "km/h" or "Bft (Beaufort)"
takes place if necessary.
Name Wind speed,
free text with a maximum
variable length of 18
characters
A text name can be assigned here to the
measured value of the wind speed,
which is displayed on the display page
of the weather station for identification.
The possible length of the text depends
on the set size of the letters or numbers
entered in the entry field and can vary. A
text with a maximum of 18 characters
can be entered.
Display rain Yes
No indication
The device offers the possibility to
display measurement data of a KNX
weather station. Each measured value
on the display page of the weather
station has its own display element. The
Page 271 of 347
Software "Smart Control 501511"
Parameters