Art. No. SC 1000 KNX
converted by the device so that these
measured values are displayed in
"kLux".
Name Brightness 2,
free text with a maximum
variable length of 18
characters
A text name can be assigned here to the
measured value of the second
brightness (e.g. "Sun South"), which is
displayed on the display page of the
weather station for identification. The
possible length of the text depends on
the set size of the letters or numbers
entered in the entry field and can vary. A
text with a maximum of 18 characters
can be entered.
Display brightness 3 in kLux
No indication
The device offers the possibility to
display measurement data of a KNX
weather station. Each measured value
on the display page of the weather
station has its own display element. The
measured value itself is received by a
separate KNX communication object.
This parameter defines whether the
measured value "Brightness 3" should
be evaluated and displayed. The unit of
the measured value is defined as
"kLux". Up to 4 different brightness
values can be displayed (brightness 1,
2, 3 and max. brightness) by adding
further measured values.
The brightness measured value must be
transmitted to the device via the bus in
the format "lux" in compliance with KNX
DPT 9.004. The measured value is
converted by the device so that these
measured values are displayed in
"kLux".
Name Brightness 3,
free text with a maximum
variable length of 18
characters
A text name can be assigned here to the
measured value of the third brightness
(e.g. "Sun West"), which is displayed on
the display page of the weather station
for identification. The possible length of
the text depends on the set size of the
letters or numbers entered in the entry
field and can vary. A text with a
maximum of 18 characters can be
entered.
Display maximum
brightness
in kLux
No indication
The device offers the possibility to
display measurement data of a KNX
weather station. Each measured value
on the display page of the weather
station has its own display element. The
measured value itself is received by a
separate KNX communication object.
This parameter defines whether the
measured value "maximum brightness"
Page 273 of 347
Software "Smart Control 501511"
Parameters