Juniper ACX7348 - ACX7348 Site Guidelines and Requirements

ACX7348 Site Guidelines and Requirements
SUMMARY
The proper funcon of the ACX7348 router depends
on you meeng certain environmental requirements,
following site and wiring guidelines, and ensuring
that your installaon meets the grounding
specicaons and airow clearance requirements
that support ACX7348 routers.
IN THIS SECTION
Environmental Requirements and
Specicaons for ACX7348 Routers | 43
General Site Guidelines | 44
Site Electrical Wiring Guidelines | 44
ACX7348 Grounding Cable and Lug
Specicaons | 46
Clearance Requirements for Airow and
Hardware Maintenance of ACX7348 Routers
| 47
Environmental Requirements and Specicaons for ACX7348 Routers
You must install the router in a rack or cabinet in a dry, clean, well-venlated, and temperature-
controlled environment.
Follow these environmental guidelines:
• The site must be as dust-free as possible because dust can clog air intake vents and lters, reducing
the eciency of the router cooling system.
• Maintain ambient airow for normal router operaon. If the airow is blocked or restricted, or if the
intake air is too warm, the router might overheat, and the router temperature monitor might shut
down the device to protect the hardware components.
Table 18 on page 44 lists the environmental condions required for normal router operaon.
43