Juniper ACX7348 - Cable and Connector Specifications for ACX7348

Table 23: Power Requirement and Supported Operang Temperature for Industrial Grade Transceivers
(Connued)
FPC Transceiver Type Power Requirement Supported Operang
Temperature
SFP28 25G 1.5W 40 ℃ at 6000 
(standalone install)
55 ℃ at 6000 
(standalone install)
55 ℃ at 6000 
(street cabinet)
65 ℃ at 6000 
(standalone install)
65 ℃ at 6000 
(street cabinet)
Cable and Connector Specicaons for ACX7348
IN THIS SECTION
12-Fiber MPO Connectors | 56
24-Fiber MPO Connectors | 61
CS Connector | 62
LC Duplex Connectors | 62
The transceivers that an ACX7348 device supports use ber-opc cables and connectors. The type of
connector and the type of ber depend on the transceiver type.
You can determine the supported cables and connectors for your specic transceiver by using the
Hardware Compability Tool.
55