Juniper ACX7348 - ACX7348 Network Cable and Transceiver Planning

ACX7348 Network Cable and Transceiver Planning
SUMMARY
IN THIS SECTION
Determining Transceiver Support for
ACX7348 | 51
Cable and Connector Specicaons for
ACX7348 | 55
Calculang Power Budget and Power Margin
for Fiber-Opc Cables | 63
Determining Transceiver Support for ACX7348
You can use the Hardware Compability Tool to nd informaon about the pluggable transceivers and
connector types supported by your Juniper Networks device. The tool also documents the opcal and
cable characteriscs, where applicable, for each transceiver. You can search for transceivers by product—
and the tool displays all the transceivers supported on that device—or by category, interface speed, or
type. You can nd the list of supported transceivers for the ACX7348 at hps://apps.juniper.net/hct/
product/.
CAUTION: If you face a problem running a Juniper Networks device that uses a third
party opc or cable, the Juniper Networks Technical Assistance Center (JTAC) can help
you diagnose the source of the problem. Your JTAC engineer might recommend that
you check the third party opc or cable and potenally replace it with an equivalent
Juniper Networks opc or cable that is qualied for the device.
51