Juniper AP32 - Mount an Access Point on a 9;16-Inch or 15;16-Inch T-Bar

Figure 11: Mount the AP on a US 4-Inch Square Juncon Box
Video:
Mount an Access Point on a 9/16-Inch or 15/16-Inch T-Bar
To mount an access point (AP) on a 9/16-in. or 15/16-in. ceiling T-bar:
1. Aach the universal mounng bracket (APBR-U) to the T-bar.
Figure 12: Aach the Mounng Bracket (APBR-U) to a 9/16-in. or 15/16-in. T-Bar
2. Rotate the bracket unl you hear a disnct click, which indicates that the bracket is locked in place.
25