Juniper AP32 User Manual

Upgrade the Firmware on a Juniper Access Point
IN THIS SECTION
Check for AP Firmware Updates | 41
Upgrade the Firmware on an AP Manually | 42
You can upgrade the rmware on an access point (AP) either manually or automacally. With the
automac upgrade method, you can only upgrade the rmware, whereas you can use the manual
process to upgrade or downgrade the rmware. This topic covers the manual upgrade process that you
can use to upgrade the AP rmware. For informaon about the automac upgrade process, see Enable
Automac Firmware Upgrades.
Check for AP Firmware Updates
You can check for current rmware versions supported on AP models, features supported in a rmware
version, and resolved issues. To view details about AP rmware:
1. Log in to the Mist portal using your credenals.
2. Click the ? (queson-mark) icon in the top-right corner.
A drop-down menu appears.
3. Select Firmware Updates from the drop-down menu to see the currently supported rmware version
for your AP.
You can also see the release notes for the AP rmware.
41

Juniper AP32 Specifications

General

Brand	Juniper
Model	AP32
Category	Wireless Access Point
Language	English