Juniper AP32 - Mount an Access Point on a 1.5-Inch T-Bar

Figure 21: Aach the AP to a Recessed 9/16-in. T-Bar or Channel Rail
Video:
Mount an Access Point on a 1.5-Inch T-Bar
To mount an access point (AP) on a 1.5-in. ceiling T-bar, you'll need the ADPR-ADP-WS15 adapter. You
need to order the adapter separately.
1. Aach the ADPR-ADP-WS15 adapter to the T-bar.
Figure 22: Aach the ADPR-ADP-WS15 Adapter to a 1.5-Inch T-Bar
2. Aach the universal mounng bracket (APBR-U) to the adapter. Rotate the bracket unl you hear a
disnct click, which indicates that the bracket is locked in place.
30