Juniper AP32 User Manual

AP32 Access Points Overview
IN THIS SECTION
AP32 Access Point Models | 3
Benets of AP32 Access Points | 4
The Juniper® AP32 High Performance Access Point is a Wi-Fi 6 indoor access point (AP) that leverages
the Mist AI to automate network operaons and boost Wi-Fi performance. The AP32 is suitable for
retail, warehouse, school, clinic, and home oce environments.
The AP32 has three IEEE 802.11ax radios, which deliver up to 4x4 mulple input, mulple output
(MIMO) with four spaal streams. Out of the three radios, one is dedicated for scanning. The AP uses
this radio for radio resource management (RRM) and wireless security. The AP can operate in either
mul-user or single-user mode. The AP is backward compable with the 802.11a, 802.11b, 802.11g,
802.11n, and 802.11ac wireless standards.
The AP32 has an omnidireconal Bluetooth antenna to support asset visibility use cases. The AP32
provides real-me network insights and asset locaon services without the need for baery-powered
Bluetooth Low Energy (BLE) beacons and manual calibraon.
The AP32 provides maximum data rates of 2400 Mbps in the 5-GHz band and 575 Mbps in the 2.4-GHz
band.
2

Juniper AP32 Specifications

General

Brand	Juniper
Model	AP32
Category	Wireless Access Point
Language	English