Juniper AP32 - Mount an AP32, AP33, AP41, or AP43 Access Point on a 16-MM Threaded Rod

3. Posion the AP such that the shoulder screws on the AP align with the keyholes of the mounng
bracket. Slide and lock the AP in place.
Figure 30: Mount an AP32, AP33, AP41, or AP43 on a 5/8-in. Threaded Rod
Video:
Mount an AP32, AP33, AP41, or AP43 Access Point on a 16-mm
Threaded Rod
To mount an AP32, AP33, AP41, or AP43 on a 16-mm threaded rod, you'll need the APBR-M16 bracket
that you'll need to order separately.
1. Aach the APBR-M16 bracket to the threaded rod by using the lock washer and nut provided.
35