Juniper AP32 - Page 32

Figure 15: Aach the ADPR-ADP-RT15 Adapter to the T-Bar
2. Aach the universal mounng bracket (APBR-U) to the adapter. Rotate the bracket unl you hear a
disnct click, which indicates that the bracket is locked in place.
Figure 16: Aach the Mounng Bracket (APBR-U) to the ADPR-ADP-RT15 Adapter
3. Posion the AP such that the keyholes of the mounng bracket engage with the shoulder screws on
the AP. Slide and lock the AP in place.
27