100 Chapter 7 Learn Geode Connect for Android
Geode GNS3 Real-Time Sub-Meter GPS Receiver
The closer the mount point, the more precise your
positioning solution will be.
7. Choose the appropriate mount point.
8. Tap the save icon in the bottom right corner to save the
changes .
9. Tap Start NTRIP.
When NTRIP is connected and working, the word NTRIP
and a closed green plug will appear in the top right corner
of the Home page. Tap the icon to return to the NTRIP
Configuration screen at any time.
If NTRIP appears on the home page next to an open orange
plug, the Geode is still trying to establish a connection to
the NTRIP service. The connection might take a while. If
the Geode has trouble connecting, try selecting a different
mount point.
To turn off NTRIP, tap the NTRIP icon to go to the NTRIP
Configuration page. Select Stop NTRIP.
To Next Page
Loading...
Need help?
General