Chapter 8 Set Up Geode Connect for Windows PC 109
Owner's Manual
5. If the device has connected to a Geode previously, tap
the Geode name at the top of the screen.
The app will ask you what you would like to do.
Note: If the device has not previously connected to a Geode,
the app will immediately open the Device Setup page
when you open it.
6. Tap Change Device. This opens the Device Setup page.
The app will display a list of local wireless devices. Identify
your Geode via the serial number printed on its bottom
panel. Select the name of the Geode you want to pair with.
To Next Page
Loading...
Need help?
General